Skip to main content

Changes to Step #1

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

+[* black] Use the tip of a spudger or a fingernail to disconnect the large lower display connector by prying it straight up from its socket.
+[* icon_reminder] To re-attach press connectors like this one, press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is even slightly misaligned, the connector can bend, causing permanent damage.

Image 1

No previous image

Added

Image 2

No previous image

Added