Skip to main content

Fix Your Stuff

Right to Repair


Changes to Step #9

Edit by Robert Backhaus

Edit approved by Robert Backhaus


Step Lines

[title] Remove the Front Panel
[* black] Remove the power button, door sensor, and USB cables from the circuit board.
[* icon_note] Many repairs may not require this panel to be fully removed, so these cables may be left attached, if care is taken not to damage them.
[* black] Remove the 2 screws on the front left, and the one on the front right.
[* black] Release the clips in the paper output area
[* black] Release the two clips on the underside of the printer.
[* black] Pull the front panel free.