Changes to Step #2
Edit by Robert Backhaus —
Edit approved by Robert Backhaus
- Before
- After
- Unchanged
Step Lines
| [title] Remove the right hand side panel. |
| [* black] Remove the single silver screw (pictured) |
| [* black] Remove the two screws from the rear left-hand side (right hand when viewed from the front) |
| [* black] Release the one clip on the inside front of the panel. |
| [* black] Release the two clips on the underside of the printer. |
| [* black] Rotate the panel outwards until the clips on the rear of the panel detach. |
| [* icon_note] If the panel doesn't detach easily, it may help to remove the screws securing the back panel first. |