Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Robert Backhaus

Edit approved by Robert Backhaus

Before
After
Unchanged

Step Lines

[title] Remove the right hand side panel.
[* black] Remove the single silver screw (pictured)
[* black] Remove the two screws from the rear left-hand side (right hand when viewed from the front)
[* black] Release the one clip on the inside front of the panel.
[* black] Release the two clips on the underside of the printer.
[* black] Rotate the panel outwards until the clips on the rear of the panel detach.
[* icon_note] If the panel doesn't detach easily, it may help to remove the screws securing the back panel first.

Image 1

No previous image

Added