Skip to main content

Changes to Step #8

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

+[* black] Grasping the motherboard by its edges, left the bottom end up at an angle, while keeping the top edge close to the phone.
+[* black] Use your spudger to pry up the front-facing camera and make sure it separates safely from the frame. The camera can remain attached to the motherboard.
+[* black] Using your tweezers, grasp the headphone jack flex cable and carefully pull it out of its socket as you remove the motherboard.
+[* black] Remove the motherboard.
+ [* icon_caution] If you feel any resistance, ***stop***. Make sure there are no components still holding the frame to the motherboard.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added