Skip to main content

Changes to Step #7

Edit by Justin Ogihara

Edit approved by Justin Ogihara

Deleted
Added
Unchanged

Step Lines

[* red] Remove the (2) two 1.5 cm screws circled in picture one.
[* orange] Rotate the speaker to its side and remove the (2) two 1.5 cm screws circled in picture 2. Remove these screws on either side of the speaker.
[* red] Remove the (2) two 1.5 cm screws circled in picture one.
[* orange] Rotate the speaker to its side and remove the (2) two 1.5 cm screws circled in picture 2. Remove these screws on either side of the speaker.
[* black] After all screws are removed, gently remove the cover from the speaker as shown in picture 3.