Skip to main content

Changes to Step #5

Edit by Samar Al mashrafi

Edit approved by Samar Al mashrafi

Deleted
Added
Unchanged

Step Lines

[* red] Gently pull the thinner white ribbon located towards the center of the board.
[* icon_caution] Pull straight down to prevent bending or damaging the ribbon.
[* orange] Squeeze the plastic sides of the plug and pull straight down to remove this ribbon.
[* black] After removing the two ribbons, completely remove the power supply board and set it to the side.

Image 1

No previous image

Added

Image 2

No previous image

Added