Skip to main content

Changes to Step #3

Edit by Justin Ogihara

Edit approved by Justin Ogihara

Deleted
Added
Unchanged

Step Lines

[* red] Remove the (4) four 1.5 cm screws connecting the power board to the speaker.
[* orange] Remove the (2) two 1 cm screws connecting the power board to the speaker.
[* red] Remove the (4) four 1.5 cm screws connecting the power board to the speaker.
[* orange] Remove the (2) two 1 cm screws connecting the power board to the speaker.
[* icon_caution] When lifting the board, be careful of the two ribbons located underneath the board. Don't lift the board straight up, instead tilt it towards the cables. As shown in picture 2.