Skip to main content

Changes to Step #3

Edit by Samar Al mashrafi

Edit approved by Samar Al mashrafi

Deleted
Added
Unchanged

Step Lines

[* red] Remove the four 1.5 cm screws connecting the power board to the speaker.
[* orange] Remove the two 1 cm screws connecting the power board to the speaker.
[* icon_caution] When lifting the board, be careful of the two ribbons located underneath the board. Don't lift the board straight up, instead tilt it towards the cables. As shown in picture 2.

Image 1

No previous image

Added

Image 2

No previous image

Added