Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Bicycle Tire Inner Tube Replacement Introduction

Edit by Kevin Purdy

Edit approved by Kevin Purdy

Before
After
Unchanged
Conclusion
Re-insert* Check the outside and inside of the tire, visually and with your fingers, to find and remove any objects or debris that may have caused the flat. * Re-insert the tube into the tire, and align the tube stem with the hole in the rim. Using Re-seat one side of the tire bead into the rim, then, using the plastic tire levers, work to re-seat the tire on other side onto the rim. * When inflating the tire, proceed slowly, ensuring that the bead is seated properly on the rim.
Re-insert* Check the outside and inside of the tire, visually and with your fingers, to find and remove any objects or debris that may have caused the flat. * Re-insert the tube into the tire, and align the tube stem with the hole in the rim. Using Re-seat one side of the tire bead into the rim, then, using the plastic tire levers, work to re-seat the tire on other side onto the rim. * When inflating the tire, proceed slowly, ensuring that the bead is seated properly on the rim.