Fix Your Stuff Community Store

Intro History: BenQ HT1075 Projector Blower Fan Replacement

Edit by Gabriela Remulla —

Edit approved by Gabriela Remulla

Before
After
Unchanged
Device
BenQ HT1075 Projector
Type
replacement
Thing
Back Blower Fan
Title
BenQ HT1075 Projector Back Blower Fan Replacement
Introduction
Similar to the main fan, the back blower fan is essential in preventing the projector from overheating. Since projectors are prone to producing more heat than other electronic devices, the addition of a secondary fan helps in maintaining a low temperature. This guide will show how to replace the back blower fan, but it is also important to keep the fan clean from debris and particles that may potentially keep it from running smoothly.
Time Required Min
20 minutes
Time Required Max
30 minutes
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Gabriela Remulla
Public
No

Guide Prerequisites

Tools

  • Phillips Head Screwdriver: Size PH1 x1 added.
  • iFixit Opening Tool x1 added.
  • 5mm Nut Driver x1 added.
  • Philips Head Screwdriver PH2 x1 added.

Flags

  • In Progress added.
  • Student In Progress added.

Steps

Step #: 1
Before
After
stepid 180345 stepid 180345