Skip to main content

Changes to IKEA Drill Battery Replacement Introduction

Edit by Emma Hoogenboezem

Edit approved by Emma Hoogenboezem

Before
After
Unchanged
Introduction
The requirements for replacing the battery are the usage of a 4 mm phillips screwdriver, a soldering iron and tinstation, a utility knife, heatshrink tubings and two lithium batteries (3.6 V). Make sure how to use a soldering iron, especially in combination with batteries. If you are not familiar with (replacing) batteries, it might be a good idea to search for some information about how batteries work. Last but not least, create a work environment with good lighting and a clean desk. The replacement requires attention and concentration.