Skip to main content

Changes to IKEA Drill Battery Replacement Introduction

Edit by Emma Hoogenboezem

Edit approved by Emma Hoogenboezem

The requirements for replacing the battery are the usage of a 4 mm phillips screwdriver, a soldering iron and tin, a utility knife, threeheatshrink tubings and two lithium batteries (3.6 V). Make sure how to use a soldering iron, especially in combination with batteries. If you are not familiar with (replacing) batteries, it might be a good idea to search for some information about how batteries work. Last but not least, create a work environment with good lighting and a clean desk. The replacement requires attention and concentration.


  • Lithium Ion Battery 3.6V x2 removed.


  • Lithium Ion Battery 3.6V x2 added.