Skip to main content

Changes to IKEA Drill Battery Replacement Introduction

Edit by Emma Hoogenboezem

Edit approved by Emma Hoogenboezem

Before
After
Unchanged
Device
Fast Fix IKEA FIXA drill li-ion
Introduction
The requirements for replacing the battery are the usage of a 4 mm phillips screwdriver, a soldering iron and tin, a stanleyutility knife, three tubings and two lithium batteries (3.6 V). Make sure how to use a soldering iron, especially in combination with batteries. If you are not familiar with (replacing) batteries, it might be a good idea to search for some information about how batteries work. Last but not least, create a work environment with good lighting and a clean desk. The replacement requires attention and concentration.
Time Required Min
40 minutes
Time Required Max
40 minutes
Difficulty
Moderate
Difficult
Conclusion
To reassemble your device, follow these instructions in reverse order.

Tools

  • heatshrink tubing x3 added.
  • 4mm Phillips Screwdriver x1 added.
  • Soldering Workstation x1 added.
  • Lead-Free Solder x1 added.
  • Lithium Ion Battery 3.6V x2 added.
  • Utility Knife x1 added.
  • Duct Tape x1 added.