Skip to main content

Changes to Removing Bottom of iMac G4 15" 700 MHz EMC 1873 Introduction

Edit by Elliot Freerks

Pending approval

Deleted
Added
Unchanged
Introduction
UnscrewWe will unscrew the 4 Torx t-15 screws from face plate. Then bottom faceplate, then remove the bottom by carefully rotating clockwise. base to access the internal components.
UnscrewWe will unscrew the 4 Torx t-15 screws from face plate. Then bottom faceplate, then remove the bottom by carefully rotating clockwise. base to access the internal components.

Steps

Step #: 1
Before
After
Step #: 2
Before
After
Step #: 3
Before
After