Skip to main content

Changes to BCG800XL Grinder Jamming due to Worn Impeller Introduction

Edit by Ben Gottemoller

Edit approved by Ben Gottemoller

Before
After
Unchanged
Introduction
Many users of the BCG800XL SmartGrinder experience jamming or clogging and a horrible [https://www.youtube.com/watch?v=8tCumd7M7Uw|gear-stripping, clacking sort of sound] during use at some point. This is usually due to a worn out impeller or -less commonly- a stripped drive gear. This guide will show you how to inspect the and replace the impeller when it is bad.
Please review the [https://www.ifixit.com/Wiki/Breville_BCG800XL_Smart_Grinder_Troubleshooting?revisionid=HEAD| Breville Troubleshooting page] first to be sure your grinder does indeed need an impeller replacement.
Breville, unfortunately, doesn't sell replacement parts, so this tutorial has been made possible only recently by 3D printer technology. I've designed an improved impeller for the BCG800XL and made it available here: [https://www.shapeways.com/product/NASLAGCCP/breville-coffee-grinder-impeller-upgrade?optionId=59828416|Shapeways Impeller Source]
[https://youtu.be/zB5F9ha1-zs|Here's] a quick two-minute overview of this replacement part.
This guide is for the BCG800. If you have a BCG'''600'''SIL or BCG'''400'''SIL then [https://www.ifixit.com/Guide/BCG600SIL+Grinder+Jamming+due+to+Worn+Impeller/96493|go here instead].