Skip to main content

Changes to Accessing LEDs and Switches in Razer Blackwidow Ultimate 2013 Introduction

Edit by Jacob Scoles

Edit approved by Jacob Scoles

Deleted
Added
Unchanged
Title
DisassemblingAccessing LEDs and Switches in Razer Blackwidow Ultimate 2013 Keyboard Housing 2013
DisassemblingAccessing LEDs and Switches in Razer Blackwidow Ultimate 2013 Keyboard Housing 2013
Introduction
components that may need to be replaced. underneath the keys. This includes accessing the circuit board, cables, keys, LED, cleaning, the backlighting LEDs and more. While it is not entirely necessary to remove the keyboard housing switches underneath the keys. The beginning steps for replacing both components are the same. Therefore the only difference between replacing these components will be the last two steps. Step nine will be used to replace the keys, it does make it easier. LEDs while step ten will be used to access the switches either for replacement or adding the aftermarket silencers to the keys.
components that may need to be replaced. underneath the keys. This includes accessing the circuit board, cables, keys, LED, cleaning, the backlighting LEDs and more. While it is not entirely necessary to remove the keyboard housing switches underneath the keys. The beginning steps for replacing both components are the same. Therefore the only difference between replacing these components will be the last two steps. Step nine will be used to replace the keys, it does make it easier. LEDs while step ten will be used to access the switches either for replacement or adding the aftermarket silencers to the keys.
Time Required Min
5 minutes
10 minutes
Time Required Max
5 minutes
20 minutes
Difficulty
Moderate
Easy
Conclusion
your device, keyboard, follow these instructions in reverse order. order. There are no special steps to put this back together and it is just as easy to put it back together.
your device, keyboard, follow these instructions in reverse order. order. There are no special steps to put this back together and it is just as easy to put it back together.
Summary
access all the internal components. switches and the LEDs beneath the keys.
access all the internal components. switches and the LEDs beneath the keys.

Tools

  • Metal Spudger Set x1 added.
  • Magnetic Project Mat x1 added.
  • Metal Spudger x1 removed.