Skip to main content

Changes to Maxtor OneTouch 4 Mini Teardown Introduction

Edit by Peter Low

Pending approval

Deleted
Added
Unchanged
Device
[ ]Maxtor OneTouch 4 Mini
Type
[ ]teardown
Thing
[ ]Example: Logic Board
Title
[ ]Maxtor OneTouch 4 Mini Teardown
Introduction
This OneTouch 4 Mini hard drive was bought at a Fry's store in 2007. It has a 80 GB capacity, and a 8 MB Buffer. [ … ] The drive has an estimated read/write speed of 28 MB/s [ … ] I am tearing this apart so I can put this under Spinrite to fix the drive from a unreadable sector.
Time Required Min
No estimate
Time Required Max
No estimate
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
No
Summary
[ ]Tearing down a Onetouch 4 Mini to get the drive out.

Tools

  • Flathead Screwdriver x1 added.
  • Phillips #00 Screwdriver x1 added.

Flags

  • Member-Contributed Guide added.