Skip to main content

Changes to Nerf N-Strike Elite Strongarm Spring Piston Chamber Replacement Introduction

Edit by Dylan Cooper Dalrymple

Edit approved by Dylan Cooper Dalrymple

Before
After
Unchanged
Device
Nerf N-Strike Elite Strongarm
Type
replacement
Thing
Spring Piston Chamber
Title
Nerf N-Strike Elite Strongarm Spring Piston Chamber Replacement
Introduction
This spring piston mechanism acts as the primary form of energy storage for your blaster to fire darts. When the blaster is cocked, the air-tight piston mechanism is pulled back and the large spring is compressed, holding in potential energy. Once the blaster is triggered, the energy from the spring pushes the piston forward towards the front of the blaster. Because the piston is air-tight against the walls of the chamber, it pushes all of the air out towards the opening in the front. As this air exits the chamber, it then pushes the dart out of the barrel. If any issues exist with this device, it is usually with the chamber being air-tight. If any air is allowed to exit otherwise, it greatly reduces the effectiveness of the blaster.
Time Required Min
3 minutes
Time Required Max
3 minutes
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
No
Summary
If your device isn’t firing to its fullest capacity or even at all, there might be an issue with the spring piston chamber within your blaster. Follow these steps to replace or repair the spring piston chamber.

Flags

  • In Progress added.
  • Student In Progress added.