Skip to main content

Changes to Canon PowerShot SD200 LCD Screen Replacement Introduction

Edit by James Loy

Pending approval

Deleted
Added
Unchanged
Device
[ ]Canon PowerShot SD200
Type
[ ]installation
Thing
[ ]LCD Display
Title
[ ]Installing Canon PowerShot SD200 LCD Display
Introduction
[ ]The Canon PowerShot SD200 has a 2" LCD display on the back of the camera. Removing the LCD might be necessary if it is damaged. This guide will show you how to remove the LCD display.
Time Required Min
30 minutes
Time Required Max
30 minutes
Imageid
Before
After
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
No
Summary
[ ]This guide will show how to remove the LCD display from the Canon PowerShot SD200.

Guide Prerequisites

Tools

  • Phillips #00 Screwdriver x1 added.
  • Spudger x1 added.

Flags

  • In Progress added.
  • Member-Contributed Guide added.

Steps

Step #: 1
Before
After
Step #: 2
Before
After
Step #: 3
Before
After
Step #: 4
Before
After
Step #: 5
Before
After
Step #: 6
Before
After
Step #: 7
Before
After
Step #: 8
Before
After
Step #: 9
Before
After
Step #: 10
Before
After
Step #: 11
Before
After