Changes to MacBook Pro 13" Retina Display Late 2013 Logic Board Replacement Introduction
Edit by Sam Goldheart —
Edit approved by Sam Goldheart
- Before
- After
- Unchanged
| Device |
|
| Type |
|
| Thing |
|
| Title |
|
| Introduction |
Use this guide to replace a faulty logic board in your MacBook Pro 13" Retina Display Late 2013.
[ … ]
Don't forget to follow our [guide|744|thermal paste application guide] before you reinstall your heat sink.
|
| Time Required Min |
No estimate
|
| Time Required Max |
No estimate
|
| Imageid |
Before
After
|
| Difficulty |
Moderate
|
| Conclusion |
|
| Author | |
| Public |
No
|
| Summary |
|
Guide Prerequisites
- #1 was empty but is now MacBook Pro 13" Retina Display Late 2013 Lower Case Replacement.
- #2 was empty but is now MacBook Pro 13" Retina Display Late 2013 Battery Connector Replacement.
- #3 was empty but is now MacBook Pro 13" Retina Display Late 2013 Heat Sink Replacement.
- #4 was empty but is now MacBook Pro 13" Retina Display Late 2013 Fan Replacement.
- #5 was empty but is now MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement.
Tools
- P5 Pentalobe Screwdriver Retina MacBook Pro and Air x1 added.
- Spudger x1 added.
- Arctic Silver ArctiClean x1 added.
- Arctic Silver Thermal Paste x1 added.
- Phillips #000 Screwdriver x1 added.
- T5 Torx Screwdriver x1 added.
- Tweezers x1 added.
Flags
- In Progress added.
Steps
Step #: 1
Before
After
Step #: 2
Before
After
