Menu

Your Settings

Changes to Reflowing solder joints on a TEAC GSA-5300 stereo integrated amplifier Introduction

Edit by zakk —

Edit approved by zakk

Deleted
Added
Unchanged
Device
[ … ]TEAC GSA-5300 stereo integrated amplifier
Type
[ … ]repair
Thing
[ … ]Reflowing solder joints
Title
[ … ]Reflowing solder joints on a TEAC GSA-5300 stereo integrated amplifier
Introduction
[ … ]As this amplifier is almost 40 odd years old, the solder joints on the left bank, speaker wire terminal block, have cracked and now require the solder joints to be reflowed. This is a very common problem on old amplifiers.
Time Required Min
30 minutes
Time Required Max
30 minutes
Imageid
Before
After
Difficulty
Easy
Conclusion
[ … ]To reassemble your device, follow these instructions in reverse order.
Author
zakk
Public
No
Summary
[ … ]Reflowing the solder joints on the left bank, speaker wire terminal block, due to cracking.

Tools

  • Phillips #1 Screwdriver x1 added.
  • Phillips #2 Screwdriver x1 added.
  • Soldering Iron x1 added.
  • Solder x1 added.

Flags

  • In Progress added.
  • Member-Contributed Guide added.

Steps

Step #: 1
Before
stepid stepid
After
stepid 67153 stepid 67153
Step #: 2
Before
stepid stepid
After
stepid 67152 stepid 67152
Step #: 3
Before
stepid stepid
After
stepid 67154 stepid 67154
Step #: 4
Before
stepid stepid
After
stepid 67155 stepid 67155
Step #: 5
Before
stepid stepid
After
stepid 67156 stepid 67156