Skip to main content

Changes to SmartParts SP800WS Digital Photo Frame Teardown Introduction

Edit by Nicholas Ouimet

Pending approval

Before
After
Unchanged
Title
[ … ]SmartParts SP800WS Digital Photo Frame Teardown
Introduction
[ … ]This photo frame is a $20-$30 device my brother bought on eBay for my mom. Sadly, it short lived. I thought I would tear it down. The connector that connects the button assembly to the logic board was damaged by me, and so I gorilla glued it. I probably should point out it was the plug part of the wire that was damaged and not the plastic connector on the logic board its self. The display seems very lose res. Also, even though this page says this is a teardown, AND not for repair, I right all my teardowns to be repair guides for the entire device. Just go as far as you need to go.
Imageid
Before
After
Conclusion
[ … ]1
Public
Yes
No

Steps

Step #: 1
Before
After
Step #: 2
Before
After
Step #: 3
Before
After
Step #: 4
Before
After
Step #: 5
Before
After
Step #: 6
Before
After
Step #: 7
Before
After
Step #: 8
Before
After
Step #: 9
Before
After
Step #: 10
Before
After
Step #: 11
Before
After
Step #: 12
Before
After