Fix Your Stuff Community Store

Intro History: Surface Laptop Studio Battery Replacement

Edit by Connor —

Edit approved by Connor

Before
After
Unchanged
Imageid
Before
After
Conclusion
# Remove the ***cosmetic strip*** along the outside edge of the back plate by pulling with the tweezers.
# Remove the two feet on the back plate with the iFixit opening tool by prying the tool under them.
# Remove the 2 M1179289 (2mm) Screws along the width of the device with the T3 Torx Screwdriver.
# Remove the 7 M1167779 (4mm) screws under the feet of the device with the T3 Torx Screwdriver.
# Lift the back plate off lightly with your hands and set it above the device.
# Disconnect the ***battery cable*** from the bottom cover by lifting the ***pull tab*** until it clicks.
# Remove the battery with the pull tabs
** You will need to reattach the new battery with adhesive.
# To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow the instructions in reverse order.
Public
No
Yes

Steps

Step #: 1
Before
stepid 334300 stepid 334300
After
stepid 334307 stepid 334307
Step #: 2
Before
stepid 334302 stepid 334302
After
Step #: 3
Before
stepid 334303 stepid 334303
After
Step #: 4
Before
stepid 334304 stepid 334304
After
Step #: 5
Before
stepid 334305 stepid 334305
After
Step #: 6
Before
stepid 334306 stepid 334306
After
Step #: 7
Before
stepid 334307 stepid 334307
After