|
Title |
Surface Laptop Studio Battery RemovalReplacement |
|
|
Introduction |
This is a guide on how to replace the battery for your device. You may need to replace your battery if your device is unresponsive and won't turn on after charging it. ThisThere is no reason to worry though, this is a common and easy repair for your device. You will only need a few tools for the repair and it only takes 10-15 minutes. |
|
|
Conclusion |
| # Remove the ***cosmetic strip*** along the outside edge of the back plate by pulling with the tweezers. | # Remove the two feet on the back plate with the spudgeriFixit opening tool by prying the tool under them. | # Remove the 2 screwsM1179289 Screws along the width of the device with the T3 Torx Screwdriver. | | # Remove the 7 M1167779 screws under the feet of the device with the T3 Torx Screwdriver. | | # Lift the back plate off lightly with your hands and set it above the device. | | # Disconnect the ***battery cable*** from the bottom cover by lifting the ***pull tab*** until it clicks. | # Remove the battery with the pull tabs
, you** You will need to reattach the new battery with adhesive.
# To reassemble theyour device, follow the previous stepsthese instructions in reverse order. |
|