Skip to main content

Changes to MacBook Pro 13" Two Thunderbolt Ports 2019 Lower Case Replacement Introduction

Edit by Carsten Frauenheim

Edit approved by Carsten Frauenheim

Before
After
Unchanged
Device
MacBook Pro 13" Two Thunderbolt Ports 2019
Type
replacement
Thing
Lower Case
Title
MacBook Pro 13" Two Thunderbolt Ports 2019 Lower Case Replacement
Introduction
This serves as the starting point for every repair on your MacBook Pro. You'll need a P5 Pentalobe screwdriver to remove the lower case and get into the device.
'''For your safety, discharge your MacBook Pro's battery''' before you begin this procedure. A charged lithium-ion battery can create a dangerous and uncontrollable fire if accidentally punctured.
Time Required Min
5 minutes
Time Required Max
10 minutes
Imageid
Before
After
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
No
Summary
Remove the lower case on your Touch Bar MacBook Pro (2019, Two Thunderbolt 3 ports), either to replace it or to access the internals for further repair.

Guide Prerequisites

Tools

  • P5 Pentalobe Screwdriver Retina MacBook Pro and Air x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.

Parts

  • MacBook Pro 13" Retina (Touch Bar, Late 2016-2019) Lower Case x1 added.

Flags

  • In Progress added.

Steps

Step #: 1
Before
After