Skip to main content

Changes to iPhone 11 Pro Logic Board Replacement Introduction

Edit by Arty

Edit approved by Arty

Before
After
Unchanged
Device
iPhone 11 Pro
Type
replacement
Thing
Logic Board
Title
iPhone 11 Pro Logic Board Replacement
Introduction
[video|https://www.youtube.com/watch?v=eiXQdcjsDiE]
How to remove and replace the logic board on the iPhone 11 Pro.
'''Note:''' Each iPhone's logic board and Face ID + proximity sensor are paired at the factory, so replacing the logic board will disable Face ID ''unless'' you also install a replacement Face ID module + proximity sensor that has been properly paired to your new logic board.
Time Required Min
30 minutes
Time Required Max
45 minutes
Imageid
Before
After
Difficulty
Easy
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
No

Tools

  • Suction Handle x1 added.
  • Spudger x1 added.
  • Tweezers x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Phillips #000 Screwdriver x1 added.
  • P2 Pentalobe Screwdriver iPhone x1 added.
  • iPhone Standoff Screwdriver Bit x1 added.
  • Tri-point Y0 Screwdriver x1 added.

Flags

  • In Progress added.
  • Member-Contributed Guide added.