Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Motorola Moto E4 (XT1762) LCD and Digitizer Replacement Introduction

Edit by Dominik Schnabelrauch

Edit approved by Dominik Schnabelrauch

Before
After
Unchanged
Device
[ … ]Motorola Moto E4 (XT1762)
Type
[ … ]replacement
Thing
[ … ]Display
Title
[ … ]Motorola Moto E4 (XT1762) Display Replacement
Introduction
Use this guide to remove the display in the Motorola Moto E4 Plus(XT1762). [ … ] Before disassembling your phone, discharge the battery below 25%. The battery can catch fire and/or explode if accidentally punctured, but the chances of that happening are much lower if discharged. [ … ] This guide instructs you to replace only the display while leaving the original frame, motherboard, and battery in place. However, some replacement screens for this phone come pre-installed in a new frame (a.k.a. chassis), which requires a very different procedure—transplanting your phone's internals and installing a new battery. Make sure you have the correct part before starting this guide. [ … ] You’ll need replacement adhesive to reattach components during reassembly.
Time Required Min
No estimate
Time Required Max
No estimate
Imageid
Before
After
Difficulty
Moderate
Conclusion
The best way to secure the new screen is with a sheet of custom-cut double-sided tape. Apply the tape to the back of the screen, then carefully feed the display cable through the frame. Align the screen and press it into place. [ … ] To reassemble your device, follow these instructions in reverse order. [ … ] If possible, turn on your phone and test your repair before installing new adhesive and resealing the phone. [ … ] Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Author
Public
No
Summary
[ … ]This guide shows how to remove the display in the Motorola Moto E4 Plus (XT1762).

Guide Prerequisites

Tools

  • Spudger x1 added.
  • iFixit Opening Picks set of 6 x1 added.
  • Phillips #00 Screwdriver x1 added.
  • Tweezers x1 added.
  • iOpener x1 added.
  • Suction Handle x1 added.

Parts

  • Moto E4 Screen x1 added.
  • Moto E4 Screen and Digitizer x1 added.

Flags

  • In Progress added.

Steps

Step #: 1
Before
After
Step #: 2
Before
After
Step #: 3
Before
After
Step #: 4
Before
After
Step #: 5
Before
After
Step #: 6
Before
After
Step #: 7
Before
After
Step #: 8
Before
After
Step #: 9
Before
After
Step #: 10
Before
After