Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Motorola Moto E4 (XT1762) LCD and Digitizer Replacement Introduction

Edit by Tobias Isakeit

Edit approved by Tobias Isakeit

Before
After
Unchanged
Thing
DisplayLCD and Digitizer
DisplayLCD and Digitizer
Title
Motorola Moto E4 (XT1762) DisplayLCD and Digitizer Replacement
Motorola Moto E4 (XT1762) DisplayLCD and Digitizer Replacement
Introduction
Use this guide to removereplace the displayLCD and digitizer in the Motorola Moto E4 Plus(XT1762). [ … ] Before disassembling your phone, discharge the battery below 25%. The battery can catch fire and/or explode if accidentally punctured, but the chances of that happening are much lower if discharged.(XT1762). [ … ] This guide instructs you to replace only the display while leaving the original frame, motherboard, and battery in place. However, some replacement screens for this phone come pre-installed in a new frame (a.k.a. chassis), which requires a very different procedure—transplanting your phone's internals and installing a new battery. Make sure you have the correct part before starting this guide. [ … ] You’ll need replacement adhesive to reattach components during reassembly.
Use this guide to removereplace the displayLCD and digitizer in the Motorola Moto E4 Plus(XT1762). [ … ] Before disassembling your phone, discharge the battery below 25%. The battery can catch fire and/or explode if accidentally punctured, but the chances of that happening are much lower if discharged.(XT1762). [ … ] This guide instructs you to replace only the display while leaving the original frame, motherboard, and battery in place. However, some replacement screens for this phone come pre-installed in a new frame (a.k.a. chassis), which requires a very different procedure—transplanting your phone's internals and installing a new battery. Make sure you have the correct part before starting this guide. [ … ] You’ll need replacement adhesive to reattach components during reassembly.
Time Required Min
45 minutes
Time Required Max
2 hours
Summary
This guide shows how to removereplace the displayLCD and digitizer in the Motorola Moto E4 Plus (XT1762).
This guide shows how to removereplace the displayLCD and digitizer in the Motorola Moto E4 Plus (XT1762).

Guide Prerequisites

Parts

  • Moto E4 LCD and Digitizer x1 added.
  • Moto E4 Screen and Digitizer x1 removed.

Flags

  • Featured Guide added.

Steps

Step #: 1
Before
After
Step #: 2
Before
After
Step #: 3
Before
After
Step #: 4
Before
After
Step #: 5
Before
After
Step #: 6
Before
After
Step #: 7
Before
After
Step #: 8
Before
After
Step #: 9
Before
After
Step #: 10
Before
After
Step #: 11
Before
After