Skip to main content

Changes to iPad Pro 9.7" Battery Replacement Introduction

Edit by Arthur Shi

Edit approved by Arthur Shi

Deleted
Added
Unchanged
Introduction
Follow this guide to remove and replace the battery for the iPad Pro 9.7”. [ … ] Because there are steps in this guide where the battery may remain connected to the logic board, leave the iPad on until the battery is '''completely discharged''' (the iPad turns off itself) before attempting this guide. [ … ] If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]].
Follow this guide to remove and replace the battery for the iPad Pro 9.7”. [ … ] Because there are steps in this guide where the battery may remain connected to the logic board, leave the iPad on until the battery is '''completely discharged''' (the iPad turns off itself) before attempting this guide. [ … ] If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]].
Imageid
Before
After
Conclusion
Compare your new replacement part to the original part. You may need to transfer remaining components or remove adhesive backings from the new part before installing. [ … ] To reassemble your device, follow these instructions in reverse order. [ … ] Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. [ … ] Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/iPad%20Pro%209.7%22|iPad Pro 9.7” Answers Community] for troubleshooting help.[br]
Compare your new replacement part to the original part. You may need to transfer remaining components or remove adhesive backings from the new part before installing. [ … ] To reassemble your device, follow these instructions in reverse order. [ … ] Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. [ … ] Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/iPad%20Pro%209.7%22|iPad Pro 9.7” Answers Community] for troubleshooting help.[br]

Guide Prerequisites

Tools

  • iOpener x1 added.
  • Suction Handle x1 added.
  • Slip Joint Pliers x1 added.
  • Phillips #000 Screwdriver x1 added.
  • Battery Blocker x1 added.

Parts

  • iPad Pro 9.7" Battery x1 (featured) added.
  • iPad Pro 9.7" Adhesive Strips x1 added.