Skip to main content

Changes to Disassembling Asus Transformer Pad TF300 Introduction

Edit by B0NK3R5

Edit approved by B0NK3R5

I did this to replace part of the screen assembly.
It's not as detailed as it should be, but I hope it will help you out a bit /give you an idea of what you are doing.
Make sure to read the entire guide before starting to give yourself an idea of what's where etc.
There are several fragile connectors and ribbon cables. You also do not want to pry the copper heatsink off of the processor.
To reassemble your device, follow these instructions in reverse order.
Hope this helped a bit.
I Could not find a guide, so I figured I'd make my own.


  • Finger nails x1 removed.