Skip to main content

Changes to iPhone XS Max Battery Replacement Introduction

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged
Time Required Min
1 hour
Time Required Max
2 hours
Conclusion
ToCompare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing. [ … ] '''To reassemble your device, follow these instructionsthe above steps in reverse order.order.''' [ … ] Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. [ … ] Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/iPhone%20XS%20Max|Answers community] for troubleshooting help.
ToCompare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing. [ … ] '''To reassemble your device, follow these instructionsthe above steps in reverse order.order.''' [ … ] Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. [ … ] Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/iPhone%20XS%20Max|Answers community] for troubleshooting help.

Guide Prerequisites

Tools

  • P2 Pentalobe Screwdriver iPhone x1 added.
  • iOpener x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Suction Handle x1 added.
  • iSclack x1 added.
  • Tri-point Y000 Screwdriver x1 added.
  • Spudger x1 added.
  • Tweezers x1 added.
  • Phillips #000 Screwdriver x1 added.
  • Standoff Screwdriver for iPhones x1 added.

Parts

  • iPhone XS Max Replacement Battery x1 added.
  • iPhone XS Max Display Assembly Adhesive x1 added.