Skip to main content

Changes to How to Prevent Wheel Bite Introduction

Edit by Jared Stine

Edit approved by Jared Stine

Deleted
Added
Unchanged
Device
[ ]Skateboards
Type
[ ]maintenance
Title
[ ]Wheel Bite Prevention
Introduction
[ ]There are a number of ways that you can reduce the occurrence of wheel bite with your skateboard. All of these ways can be used separately or together depending on your preference and need. This guide will show you how to perform the three most fundamental methods in order of how they would be installed together. Keep in mind you can pick and choose any of these methods at your discretion.
Time Required Min
10 minutes
Time Required Max
15 minutes
Difficulty
Easy
Conclusion
[ ]To remove your risers, simply remove your trucks following the reverse directions of the [http://www.ifixit.com/Guide/Truck+Installation/11227/1|Truck Installation] guide. Follow steps of this guide in reverse to replace your old kingpin bushing.
Author
Public
No
Summary
[ ]By the end of this guide you will know how to effectively prevent wheel bite.

Tools

  • 9/16" Wrench x1 added.

Parts

  • Skateboard Truck Riser x2 added.
  • Skateboard Bushings Medium - Hard x2 added.

Flags

  • In Progress added.
  • Member-Contributed Guide added.
  • Student In Progress added.

Steps

Step #: 1
Before
After
Step #: 2
Before
After
Step #: 3
Before
After
Step #: 4
Before
After
Step #: 5
Before
After
Step #: 6
Before
After
Step #: 7
Before
After