Intro History: How to fix iTunes error 9 in an Apple iPhone 6s
Edit by Arielle Sampson —
Edit approved by Arielle Sampson
- Before
- After
- Unchanged
| Introduction |
|
|||||||||
| Time Required Min |
40 seconds
2 hours
|
|||||||||
| Time Required Max |
50 seconds
3 hours
|
Guide Prerequisites
- #1 was empty but is now iPhone 6s Pentalobe Screws Replacement.
- #2 was empty but is now Opening Procedure.
- #3 was empty but is now Battery Connector.
- #4 was empty but is now iPhone 6s Front Panel Assembly Replacement.
- #5 was empty but is now iPhone 6s Rear Camera Replacement.
- #6 was empty but is now iPhone 6s SIM Tray Replacement.
- #7 was empty but is now iPhone 6s Logic Board Replacement.
Tools
- P2 Pentalobe Screwdriver iPhone x1 added.
- Suction Handle x1 added.
- Spudger x1 added.
- Phillips #000 Screwdriver x1 added.
- Tweezers x1 added.
- iOpener x1 added.
- SIM Card Eject Tool x1 added.
- iFixit Opening Picks (Set of 6) x1 added.
- iFixit Precision 4 mm Screwdriver Bit / Nut Driver 2.5 mm x1 added.
- Heat Gun x1 removed.
- Hakko Microsoldering Starter Bundle x1 removed.
Parts
- iPhone 6s/6s Plus/7/7 Plus Bottom Screws x1 added.
- iPhone 6s Rear Camera x1 added.
- iPhone 6s Rear Camera Bracket x1 added.
- iPhone 6s Display Assembly Adhesive x1 added.
- iPhone 6s Nano SIM Card Tray x1 added.
- iPhone 6s Logic Board EMI Shield Stickers x1 added.
- iPhone 6s Logic Board x1 added.
- iPhone 6s Screw Set x1 added.
Steps
Step #: 1
Before
After
