Skip to main content

Changes to TP-Link MR3040 Wireless Router Disassembly Introduction

Edit by steve

Edit approved by steve

Deleted
Added
Unchanged
Time Required Min
5 minutes
Time Required Max
5 minutes
Difficulty
Moderate
Easy
Conclusion
device, follow these instructions snap it back together. Bear in reverse order. mind that if you remove the circuit board you'll need to align the power and other switch with their carriers in the gray case.
device, follow these instructions snap it back together. Bear in reverse order. mind that if you remove the circuit board you'll need to align the power and other switch with their carriers in the gray case.

Tools

  • Phillips #00 Screwdriver x1 added.
  • Flathead 3/32" or 2.5 mm Screwdriver x1 added.

Flags

  • In Progress removed.