Skip to main content

Changes to Install firmware on Xbox One S Introduction

Edit by KimJongIan

Edit approved by KimJongIan

Before
After
Unchanged
Device
Xbox One S
Type
technique
Title
How to install firmware on Xbox One HDD Replacement (Launch or S)
Introduction
Guide created by KimJongIan
With help by iFixit users Andrew and MervDervis
Time Required Min
30 minutes
Time Required Max
1 hour
Imageid
Before
After
Difficulty
Difficult
Conclusion
To reassemble your device, put the hard drive back in the Xbox One S and reassemble.
Author
Public
No
Summary
This guide will show you how to install official XBox One firmware on a blank HDD or SSD.

Guide Prerequisites

Tools

  • iFixit Opening Tool x1 added.
  • TR10 Torx Security Screwdriver x1 added.

Parts

  • Xbox One S Top Case x1 added.
  • Xbox One S Bottom Panel x1 added.
  • Xbox One S Chassis and Rear Panel x1 added.
  • Xbox One S HDD x1 added.
  • Xbox One S Hard Drive SATA Cable x1 added.

Flags

  • Member-Contributed Guide added.

Steps

Step #: 1
Before
After
Step #: 2
Before
After
Step #: 3
Before
After
Step #: 4
Before
After
Step #: 5
Before
After
Step #: 6
Before
After
Step #: 7
Before
After
Step #: 8
Before
After
Step #: 9
Before
After
Step #: 10
Before
After
Step #: 11
Before
After
Step #: 12
Before
After
Step #: 13
Before
After