Skip to main content

Changes to MacBook Pro 15" Unibody Mid 2010 Front Bezel Replacement Introduction

Edit by Walter Galan

Edit approved by Walter Galan

Deleted
Added
Unchanged
Thing
Matte Finish LCDFront Bezel
Matte Finish LCDFront Bezel
Title
2010 Matte Finish LCD Front Bezel
2010 Matte Finish LCD Front Bezel
Introduction
Save money by replacing just the LCD rather than the whole display assembly. ThisUse this guide is only to replace the front bezel. '''Only applicable for anti-glare matte finish displays. to Matte Displays.'''
Save money by replacing just the LCD rather than the whole display assembly. ThisUse this guide is only to replace the front bezel. '''Only applicable for anti-glare matte finish displays. to Matte Displays.'''
Difficulty
Very difficult
Difficult
Author
Summary
Replace a broken Matte LCD on the Front Bezel in your MacBook Pro 15" Unibody Mid 2010.
Replace a broken Matte LCD on the Front Bezel in your MacBook Pro 15" Unibody Mid 2010.

Guide Prerequisites

Tools

  • Heat Gun x1 added.
  • iFixit Guitar Picks set of 8 x1 added.
  • Phillips #00 Screwdriver x1 added.
  • Spudger x1 added.
  • T6 Torx Screwdriver x1 added.
  • Tri-point Y0 Screwdriver x1 added.
  • Y1 Tri-point Screwdriver x1 added.

Steps

Step #: 1
Before
After
Step #: 2
Before
After
Step #: 3
Before
After
Step #: 4
Before
After
Step #: 5
Before
After
Step #: 6
Before
After
Step #: 7
Before
After
Step #: 8
Before
After
Step #: 9
Before
After
Step #: 10
Before
After
Step #: 11
Before
After
Step #: 12
Before
After
Step #: 13
Before
After
Step #: 14
Before
After
Step #: 15
Before
After
Step #: 16
Before
After
Step #: 17
Before
After