Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to BEM Mojo 2 Charging Base Motherboard Replacement Introduction

Edit by Rachel Iacoboni

Edit approved by Rachel Iacoboni

[ ]The charging base motherboard may need to be replaced due to the ON/OFF switch not working properly. It is important to make sure before replacing the charging base motherboard that it is the proper cause of the issue. Before replacing, try wiping down and cleaning the buttons on the device with a clean, damp towel. Also make sure that when pushing the button to the ON position that you hear a click indicating that the device should turn ON. If both of these attempts have been made with no results, please use this guide to replace the charging base motherboard.


  • Phillips #0 Screwdriver x1 added.
  • Philips Head Screwdriver size J0 x1 added.
  • J1 Screwdriver Bit x1 removed.