Changes to Drawer Track Alignment Spacer Introduction
|Time Required Min||
|Time Required Max||
- Phillips Screwdriver general x1 added.
- 3D printed universal drawer track spacer x1 The spacer is designed for use on either side. pick your required width: 1mm-6mm. One spacer can be used on either side for better drawer alignment and up to 12mm of gap adjustment added.
- Flat head wood screw x1 The original drawer screw may not be long enough after the drawer track spacer is added. Use a longer equivalent size screw to account for the spacer if needed added.
- Dare To Repair added.
- In Progress added.
- Member-Contributed Guide added.