Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to MacBook Pro 13" Unibody Mid 2012 Upper Case Replacement Introduction

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged
Device
[ ]MacBook Pro 13" Unibody Mid 2012
Type
[ ]installation
Thing
[ ]Upper Case Replacement
Title
[ ]Installing MacBook Pro 13" Unibody Mid 2012 Upper Case Replacement
Introduction
[video|http://www.youtube.com/watch?v=B3oGp1IaQIM] [ … ] Replacing the upper case requires the removal of nearly every component in your MacBook Pro. You will also need to transfer your old trackpad over to your new upper case.
Time Required Min
No estimate
Time Required Max
No estimate
Imageid
Before
After
Difficulty
Difficult
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
No
Summary
[ ]Replace the upper case in your Late 2011 MacBook Pro 13" Unibody.

Guide Prerequisites

Tools

  • Phillips #00 Screwdriver x1 added.
  • iFixit Opening Tools x1 added.
  • Spudger x1 added.
  • T6 Torx Screwdriver x1 added.
  • T8 Torx Screwdriver x1 added.
  • Y1 Tri-point Screwdriver x1 added.

Flags

  • In Progress added.