Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Smart UF75 DLP Projector Teardown Introduction

Edit by David42

Edit approved by David42

Deleted
Added
Unchanged
Device
[ ]Smart UF75 DLP Projector
Type
[ ]teardown
Title
[ ]Smart UF75 DLP Projector Teardown
Introduction
The Smart UF75 projector shines light through a spinning colour wheel onto a Digital Micromirror Device (DMD) with 1024*768 small mirrors that move to switch each pixel on or off. The light is then focused and reflected off a curved mirror to create the ultra short throw. [ … ] The guide shows the separation of the core components of the projector. [ … ] The guide includes dismantling the important optical parts that were probably originally assembled in a clean room. Do not do this if you are intending to use the projector afterwards.
Time Required Min
1 hour
Time Required Max
1 hour
Imageid
Before
After
Difficulty
Moderate
Author
Public
No
Summary
[ ]Dismantling a Smart UF75 DLP projector.

Guide Prerequisites

Tools

  • Phillips #2 Screwdriver magnetic x1 added.
  • Phillips #1 Screwdriver x1 added.

Flags

  • In Progress added.
  • Member-Contributed Guide added.

Steps

Step #: 1
Before
After
Step #: 2
Before
After
Step #: 3
Before
After
Step #: 4
Before
After
Step #: 5
Before
After
Step #: 6
Before
After