Skip to main content

Changes to PowerBook G4 Aluminum 15" 1-1.5 GHz Clutch Cover Replacement Introduction

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged
Introduction
Use this guide to replace your clutch cover.
Imageid
Before
After
Difficulty
Moderate
Very difficult

Guide Prerequisites

Tools

  • Phillips #00 Screwdriver x1 added.
  • Push Pin x1 added.
  • Flathead 3/32" or 2.5 mm Screwdriver x1 added.
  • Spudger x1 added.
  • T6 Torx Screwdriver x1 added.
  • TR8 Torx Security Screwdriver x1 added.
  • iPod Opening Tools x1 added.

Steps

Step #: 1
Before
After
Step #: 2
Before
After
Step #: 3
Before
After
Step #: 4
Before
After
Step #: 5
Before
After
Step #: 6
Before
After