Skip to main content

Changes to Eureka EasyClean 71C Belt Replacement Introduction

Edit by Tanner Durnil

Edit approved by Tanner Durnil

Deleted
Added
Unchanged
Device
[ ]Eureka EasyClean 71C
Type
[ ]replacement
Thing
[ ]Belt
Title
[ ]Eureka EasyClean 71C Belt Replacement
Introduction
[ ]Sometimes, the belt in the vacuum can go bad or even just come loose. In order to properly maintain your vacuum, it’s important to know how to replace the belt. This guide covers the necessary steps for a successful replacement. Make sure your vacuum is off before attempting any replacements.
Time Required Min
5 minutes
Time Required Max
5 minutes
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
No
Summary
[ ]This guide covers how to replace the vacuum’s belt.

Guide Prerequisites

Tools

  • iFixit Opening Tools x1 added.
  • Phillips #2 Screwdriver x1 added.
  • Metal Spudger x1 added.

Flags

  • In Progress added.
  • Student In Progress added.

Steps

Step #: 1
Before
After