Introduction

Dismantling guide

Tools

Parts

No parts required.

Screws Frame kit for the rack (ears) Frame kit for the rack (ears)
  • Screws

  • Frame kit for the rack (ears)

Add Comment

To remove the cover it is necessary to disconnect the DB9 connector To remove the cover it is necessary to disconnect the DB9 connector
  • To remove the cover it is necessary to disconnect the DB9 connector

Add Comment

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
The lid comes out when sliding The lid comes out when sliding
  • The lid comes out when sliding

Add Comment

To remove the motherboard it is necessary to remove the 6 screws that fix it to the chassis If the device does not save the time, you can replace the battery CR2032 3 Volt Lithium
  • To remove the motherboard it is necessary to remove the 6 screws that fix it to the chassis

  • If the device does not save the time, you can replace the battery

  • CR2032 3 Volt Lithium

Add Comment

The rubbers prevent the plate from contacting the chassis.
  • The rubbers prevent the plate from contacting the chassis.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Special thanks to these translators:

100%

irlanda is helping us fix the world! Want to contribute?
Start translating ›

Eneider Colina

Member since: 09/20/2013

1,143 Reputation

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 9

All Time: 60