Skip to main content

Access to the components 1

Archived Guide
This guide is retained solely for historical purposes. Use the updated version of the guide to perform your repair.

What you need

  1. Access to the components 1, Battery: step 1, image 1 of 3 Access to the components 1, Battery: step 1, image 2 of 3 Access to the components 1, Battery: step 1, image 3 of 3
    • Open the latch on the right side that secures the battery in place.

    • Open the latch on the left side that secures the battery in place.

    • Now remove the battery.

  2. Access to the components 1, Access to the components 1: step 2, image 1 of 3 Access to the components 1, Access to the components 1: step 2, image 2 of 3 Access to the components 1, Access to the components 1: step 2, image 3 of 3
    • Use the Philips screwdriver to remove the two screws on the bottom cover.

    • Check the markers to determine how to remove the cover.

    • Now remove the cover as prescribed by the markers.

  3. Access to the components 1: step 3, image 1 of 1
    • The components HDD hard disk and BIOS battery are now visible.

Conclusion

To assemble the device, proceed in reverse order

Special thanks to these translators:

de en

100%

irlanda is helping us fix the world! Want to contribute?
Start translating ›

Felice Suglia

Member since: 06/15/13

30,884 Reputation

264 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 49