Introduction

When your memory card is full, you can follow these steps to install another microSD card in your iON.

Peel the rubber cover for the memory card and USB port away from the goggles. Be careful not to completely remove the cover!
  • Peel the rubber cover for the memory card and USB port away from the goggles.

  • Be careful not to completely remove the cover!

Add Comment

Push the memory card in until you hear it click. Pull your finger away.
  • Push the memory card in until you hear it click.

  • Pull your finger away.

  • If you pull your finger away too quickly, the card can completely pop out of the slot and could get lost!

  • The memory card will pop out about half way out of its slot.

Add Comment

Pull the memory card straight out of its slot. Pull the memory card straight out of its slot.
  • Pull the memory card straight out of its slot.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Eric Flores

Member since: 07/31/2012

126 Reputation

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,149