Introduction

Use this guide to remove the front speaker in your Xiaomi Redmi 2 for repair or replacement.

Use the flat end of the spudger to remove the back panel from the mid-frame and front body. Use the flat end of the spudger to remove the back panel from the mid-frame and front body.
  • Use the flat end of the spudger to remove the back panel from the mid-frame and front body.

Add Comment

Insert your finger into the curved opening of the mid-frame.
  • Insert your finger into the curved opening of the mid-frame.

  • Lift the battery and remove.

Add Comment

Remove the SIM and/or memory cards if present.
  • Remove the SIM and/or memory cards if present.

  • Remove twelve 3.4 mm Phillips #000 screws securing the mid-frame to the front body.

Add Comment

Slide the spudger between the mid-frame and front body, gradually prying the two bodies apart as you slide the spudger around the perimeter of the phone.
  • Slide the spudger between the mid-frame and front body, gradually prying the two bodies apart as you slide the spudger around the perimeter of the phone.

Add Comment

Remove the 3.4 mm Phillips #000 screw that holds the motherboard to the front body.
  • Remove the 3.4 mm Phillips #000 screw that holds the motherboard to the front body.

  • Keep this screw separate from the initial twelve.

Add Comment

Deck the Halls
With tools and Fix Kits
Using one prong of the tweezers, pry back the brown clip located on top of the LCD ribbon connector. Using one prong of the tweezers, pry back the brown clip located on top of the LCD ribbon connector.
  • Using one prong of the tweezers, pry back the brown clip located on top of the LCD ribbon connector.

Add Comment

Using one prong of the tweezers, pry the ribbon clip away from the motherboard. Using one prong of the tweezers, pry the ribbon clip away from the motherboard.
  • Using one prong of the tweezers, pry the ribbon clip away from the motherboard.

I broke the connector of this flat cable, which with a replacement part without having to change the entire mother board? Another doubt, this flat cable is responsible for which function in the cell?

lucaslgf2 - Reply

Lift and  hinge the motherboard with your fingers. Lift and  hinge the motherboard with your fingers.
  • Lift and hinge the motherboard with your fingers.

Add Comment

Using one prong of the tweezers, lift and pry back the metal clip positioned over the front proximity sensor ribbon connector. Using one prong of the tweezers, lift and pry back the metal clip positioned over the front proximity sensor ribbon connector.
  • Using one prong of the tweezers, lift and pry back the metal clip positioned over the front proximity sensor ribbon connector.

Add Comment

Using the tweezers, pull the antenna connector from the motherboard. Using the tweezers, pull the antenna connector from the motherboard.
  • Using the tweezers, pull the antenna connector from the motherboard.

Add Comment

Lift the motherboard out of the front cover and set aside.
  • Lift the motherboard out of the front cover and set aside.

Add Comment

Using the nylon or metal spudger, gently pry the front speaker from the screen assembly.
  • Using the nylon or metal spudger, gently pry the front speaker from the screen assembly.

Add Comment

Using your fingers, gently lift the front speaker from the screen assembly.
  • Using your fingers, gently lift the front speaker from the screen assembly.

Thanks. I was replacing a friend's digitizer, and in the process, broke the speaker (they come apart very easily). So I decided to replace her broken speaker with mine (we both have a Note 2). Then I broke MINE taking it out. So now I have to order two new speakers. Arggghhh.

moshiach.now - Reply

Rademi 2 back Spekar

Amol Surve - Reply

Sar rademi 2 front Speakers probably

Amol Surve - Reply

Conclusion

To reassemble your device, follow these instructions in reverse order.

7 other people completed this guide.

Alicia Brenner

Member since: 10/01/2015

2,845 Reputation

5 Guides authored

Team

USF Tampa, Team 1-3, Leahy Fall 2015 Member of USF Tampa, Team 1-3, Leahy Fall 2015

USFT-LEAHY-F15S1G3

2 Members

5 Guides authored

4 Comments

How can I remove the contact from the speaker? I bought a new screen and it hasn't this contact and the vibracall module, but the second I know how to remove from the old screen.

brunofichos - Reply

sorry about my english, I want to say "back speaker's contact" not "contact from the speaker". Thanks

brunofichos -

You know how to remove the speaker contacts from the rear speaker. It's stuck in the redmi2pro frame. I bought an LCD touch frame and need to move the components to the new one.

afreitasleonardo - Reply

Rademi 2 front Speakers problem

Amol Surve - Reply

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 32

Past 30 Days: 177

All Time: 3,554