Xbox Series X Back Panel Replacement

You're viewing a previously published version of this guide. View latest version

Apr 08, 2021 - 01:53:36

Oct 12, 2023 - 10:16:39 Oct 12, 2023 - 10:15:58 Oct 12, 2023 - 10:12:02 Oct 12, 2023 - 10:10:04 Oct 12, 2023 - 10:01:47 Apr 08, 2021 - 01:53:40 Apr 08, 2021 - 01:53:36 Apr 07, 2021 - 06:22:10 Apr 07, 2021 - 06:14:23 Apr 07, 2021 - 05:05:10 Apr 07, 2021 - 05:03:46 Apr 06, 2021 - 09:56:06 Apr 06, 2021 - 09:39:45 Apr 02, 2021 - 05:29:12 Apr 02, 2021 - 05:27:35 Apr 02, 2021 - 04:52:09 Apr 02, 2021 - 04:51:04 Apr 02, 2021 - 04:50:53 Apr 02, 2021 - 04:50:18 Apr 02, 2021 - 04:49:54 Apr 02, 2021 - 04:49:48 Apr 02, 2021 - 04:44:07 Apr 02, 2021 - 04:00:36 Apr 02, 2021 - 04:00:27 Apr 02, 2021 - 04:00:02 Apr 02, 2021 - 03:59:56 Apr 02, 2021 - 03:59:43 Apr 02, 2021 - 03:59:23 Apr 02, 2021 - 03:53:07 Apr 02, 2021 - 02:25:04 Apr 02, 2021 - 01:56:22 Apr 02, 2021 - 01:55:59 Apr 02, 2021 - 01:53:50 Apr 02, 2021 - 01:53:15 Apr 02, 2021 - 01:51:50 Apr 02, 2021 - 01:50:58 Apr 02, 2021 - 01:50:51 Apr 02, 2021 - 01:50:12 Apr 02, 2021 - 01:49:15 Apr 02, 2021 - 01:47:23 Apr 02, 2021 - 01:46:57 Apr 02, 2021 - 01:45:16 Apr 02, 2021 - 01:44:23 Apr 02, 2021 - 01:31:51 Apr 02, 2021 - 01:31:11

Newer

Introduction

Prerequisite-only guide! This guide is part of another procedure and is not meant to be used alone.

Use this guide to remove the back panel on an Xbox Series X.

What you need

Step 1 Uncover the back panel screws

Xbox Series X Back Panel Replacement, Uncover the back panel screws: step 1, image 1 of 2

Xbox Series X Back Panel Replacement, Uncover the back panel screws: step 1, image 2 of 2

Before starting this guide, power down your console and unplug all cables.
Use a pair of tweezers to remove the sticker hiding the first screw on the back panel, near the base.

Step 2

Xbox Series X Back Panel Replacement: step 2, image 3 of 3

Use a pair of blunt tweezers to peel back the large sticker on the back panel to reveal the second screw.
You only need to peel this sticker to where you can access the hidden screw. You don't need to pull it completely off.
Technically, these are tamper-evident stickers—but don't worry—Microsoft can't legally void your warranty, as long as you don't damage anything. Have fun!

Step 3 Remove the back panel screws

Xbox Series X Back Panel Replacement, Remove the back panel screws: step 3, image 1 of 1

Tool used on this step:

Magnetic Project Mat

$19.95

Buy

Use a T8 Torx driver to remove the two 7.4 mm screws securing the back panel.
Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your console.

Step 4 Unclip the back panel

Xbox Series X Back Panel Replacement, Unclip the back panel: step 4, image 1 of 3

Xbox Series X Back Panel Replacement, Unclip the back panel: step 4, image 2 of 3

Xbox Series X Back Panel Replacement, Unclip the back panel: step 4, image 3 of 3

Insert the flat end of a spudger into the gap between the back panel and the shell, near the left side of the base.
Pivot the spudger on the shell and pull up on the bottom of the back panel to release it from the locking clips.

Step 5

Insert the flat end of a spudger into the gap between the back panel and the shell, near the right side of the base.
Pivot the spudger on the shell and pull up on the bottom of the back panel to release it from the locking clips.

Step 6 Remove the back panel

Xbox Series X Back Panel Replacement, Remove the back panel: step 6, image 1 of 3

Xbox Series X Back Panel Replacement, Remove the back panel: step 6, image 2 of 3

Xbox Series X Back Panel Replacement, Remove the back panel: step 6, image 3 of 3

Grip the back panel at the opening you just created and pull it up and away from the shell to unclip the long edges.
During reassembly, press along the edges of the back panel to snap it into place.

Step 7

Xbox Series X Back Panel Replacement: step 7, image 3 of 3

The back panel slots into a gap at the top of the shell.
Tilt the back panel up and pull it away from the top edge of the shell to release it from the gap.
Remove the back panel.