Skip to main content

Replace Whirlpool pressure switch

What you need

  1. Replace Whirlpool pressure switch, Gecko pressure switch: step 1, image 1 of 2 Replace Whirlpool pressure switch, Gecko pressure switch: step 1, image 2 of 2
    • Locate the pressure valve

  2. Replace Whirlpool pressure switch: step 2, image 1 of 2 Replace Whirlpool pressure switch: step 2, image 2 of 2
    • Use a Phillips screwdriver to loosen the screw

    • open the lid

  3. Replace Whirlpool pressure switch: step 3, image 1 of 3 Replace Whirlpool pressure switch: step 3, image 2 of 3 Replace Whirlpool pressure switch: step 3, image 3 of 3
    • Disconnect the plug from the pressure switch

  4. Replace Whirlpool pressure switch: step 4, image 1 of 3 Replace Whirlpool pressure switch: step 4, image 2 of 3 Replace Whirlpool pressure switch: step 4, image 3 of 3
    • Route the pressure switch cable out of the control box

  5. Replace Whirlpool pressure switch: step 5, image 1 of 3 Replace Whirlpool pressure switch: step 5, image 2 of 3 Replace Whirlpool pressure switch: step 5, image 3 of 3
    • Cut off the cable ties

    • Peel off the rubber

    • Pull off the electrical contacts

    • It doesn't matter which way around the contacts are reconnected during assembly

  6. Replace Whirlpool pressure switch: step 6, image 1 of 2 Replace Whirlpool pressure switch: step 6, image 2 of 2
    • Unscrew the pressure switch with an open-end wrench

    • Check whether there is any dirt in the openings of the pressure switch and the holder. If necessary, remove the dirt.

Conclusion

Follow these steps in reverse order to reassemble your device

Special thanks to these translators:

de en

100%

oldturkey03 is helping us fix the world! Want to contribute?
Start translating ›

AquaWhirlpools

Member since: 05/02/14

109 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 21

All Time: 1,681