Skip to main content

Water Damage on main board of Nokia 206 RM873

What you need

  1. Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: step 1, image 1 of 3 Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: step 1, image 2 of 3 Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: step 1, image 3 of 3
    • Remove back cover & battery.

  2. Water Damage on main board of Nokia 206 RM873: step 2, image 1 of 2 Water Damage on main board of Nokia 206 RM873: step 2, image 2 of 2
    • Remove the front case by prying it open. You will hear clicks.

    • Be careful with taking off screen if you use a spudger.

  3. Water Damage on main board of Nokia 206 RM873: step 3, image 1 of 2 Water Damage on main board of Nokia 206 RM873: step 3, image 2 of 2
    • Use a Torx screwdriver to remove the screen screws.

    • Use a spudger or tweezers to remove the connector of the LCD screen.

  4. Water Damage on main board of Nokia 206 RM873: step 4, image 1 of 3 Water Damage on main board of Nokia 206 RM873: step 4, image 2 of 3 Water Damage on main board of Nokia 206 RM873: step 4, image 3 of 3
    • Remove keyboard by prying it open with a spudger.

    • The keyboard is secured with adhesive, be careful!

  5. Water Damage on main board of Nokia 206 RM873: step 5, image 1 of 3 Water Damage on main board of Nokia 206 RM873: step 5, image 2 of 3 Water Damage on main board of Nokia 206 RM873: step 5, image 3 of 3
    • The PCB board had water damage, see this in picture 3.

    • To remove the corrosion, dab a cotton swab with a little distilled water on the corroded area, the corrosion will disappear.

  6. Water Damage on main board of Nokia 206 RM873: step 6, image 1 of 2 Water Damage on main board of Nokia 206 RM873: step 6, image 2 of 2
    • How and where to use the cotton swabs.

Conclusion

To reassemble your device, follow these instructions in reverse order.

16 other people completed this guide.

Kevin D

Member since: 05/02/14

7,276 Reputation

21 Guides authored

4 Comments

no use .it is not switching on . replaced with good batter also. no on

nabhan75 - Reply

try to clean with an ultrasonic bath.

measure out powerrail.

measure out the voltage coming in on board. try to see if you have short.

Kevin D - Reply

Nokia 206 display and charger pin

Mithilesh Yadav - Reply

Not working kiy 1.2.3 and colling ricev kiy not working

K .M Jugesh - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 8

All Time: 10,745